Posts: 5,803
Likes Received: 18,710 in 5,220 posts
Likes Given: 12,118
Joined: Sep 2019
ID: 67
Country:
10-17-2022, 03:04 PM RE: For the Boaties
(This post was last modified: 10-18-2022, 01:50 PM by Arkan_Ted.)
(10-17-2022, 02:34 AM)IDR Wrote: Gonna take my huge 15 foot Ebbtide with a 70 horse Evinrude on it, out this coming Wednesday. The bass are biting anything thrown into the Snake River, so I am told. Hope to have bass and ham cakes this coming weekend.
Pretty economical old boat. I can run it all day on 4 gallons of gas. Insurance is cheap, it ain't worth much. Maybe a little liability in case I hit a 200,000 dollar wake board boat.  @IDR Hope to have bass and ham cakes this coming weekend.
It's down right hurtful to publicize that.  Best of luck.
Posts: 9,963
Likes Received: 32,813 in 8,279 posts
Likes Given: 19,088
Joined: Sep 2019
ID: 200
Country:
10-18-2022, 06:14 AM RE: For the Boaties
(10-16-2022, 11:14 PM)Arkan_Ted Wrote: (10-16-2022, 10:29 PM)Pipkunts Wrote: Can put this in the Cat thread 
![[Image: N6zOp5P.jpg]](https://i.imgur.com/N6zOp5P.jpg) I really dig that paint scheme. It would be a great dive boat. It's a wrap. As for Sea worthiness there is a reason why emergency services used them for decades, no turning circle but punches the swell on a cloud. It's a plate boat as well.
The following 1 user Likes Pipkunts's post:1 user Likes Pipkunts's post
• Arkan_Ted
Posts: 9,963
Likes Received: 32,813 in 8,279 posts
Likes Given: 19,088
Joined: Sep 2019
ID: 200
Country:
10-18-2022, 06:36 AM RE: For the Boaties
The Kiwis are right up there in plate boat manufacturers.
In Aus to tow over 2.5mts wide is oversize and to much pissing around. So Trailerable craft.
Surtees NZ, there was a split and a new team started in Aus named Bar Crusher.
Too wide for towing.
The following 1 user Likes Pipkunts's post:1 user Likes Pipkunts's post
• Arkan_Ted
Posts: 9,963
Likes Received: 32,813 in 8,279 posts
Likes Given: 19,088
Joined: Sep 2019
ID: 200
Country:
10-18-2022, 06:41 AM RE: For the Boaties
If you're full down Sth go check out our Rivs.
https://youtu.be/dX9NNra3cic
The following 1 user Likes Pipkunts's post:1 user Likes Pipkunts's post
• Arkan_Ted
Posts: 5,803
Likes Received: 18,710 in 5,220 posts
Likes Given: 12,118
Joined: Sep 2019
ID: 67
Country:
10-18-2022, 01:54 PM RE: For the Boaties
(10-18-2022, 06:14 AM)Pipkunts Wrote: (10-16-2022, 11:14 PM)Arkan_Ted Wrote: (10-16-2022, 10:29 PM)Pipkunts Wrote: Can put this in the Cat thread 
![[Image: N6zOp5P.jpg]](https://i.imgur.com/N6zOp5P.jpg) I really dig that paint scheme. It would be a great dive boat. It's a wrap. As for Sea worthiness there is a reason why emergency services used them for decades, no turning circle but punches the swell on a cloud. It's a plate boat as well. When we were diving all the time in Cuba, if not entering the coral reefs from shore we dove from a barrel boat. It's all about stability extracting from the deep. Plus your tired. I really like that boat. It projects a good feel. I hope that doesn't come across to wierd.
The following 1 user Likes Arkan_Ted's post:1 user Likes Arkan_Ted's post
• Pipkunts
Posts: 162
Likes Received: 201 in 91 posts
Likes Given: 35
Joined: Apr 2022
ID: 1624
Country:
10-18-2022, 06:18 PM RE: For the Boaties
(10-17-2022, 02:28 PM)Saul Goode Wrote: I learned many years ago that a boat is a hole in the water you throw money in.
The only boat I have now is a sit-on-top kayak. My sailboat was lost in a fire and I never replaced it. I sold the other boats when I needed money.
I’ve had more fun with that kayak than any boat I’ve been involved with. It has been in the water more often than all the others combined.
![[Image: 2cCgYG9.jpg]](https://i.imgur.com/2cCgYG9.jpg)
I've got a Mokai jet powered Kayak ....
This is one of the org. one piece models ....mine is a 2015 3 pcs unit, has 7hp subaru engine with elec start and depending on operator's weight can reach speeds of 20mph !!
https://www.youtube.com/watch?v=HfmWzP_FSqk
Posts: 5,803
Likes Received: 18,710 in 5,220 posts
Likes Given: 12,118
Joined: Sep 2019
ID: 67
Country:
10-18-2022, 08:35 PM RE: For the Boaties
(10-18-2022, 06:41 AM)Pipkunts Wrote: If you're full down Sth go check out our Rivs.
https://youtu.be/dX9NNra3cic The last one was kicking.
•
Posts: 30,346
Likes Received: 169,526 in 29,607 posts
Likes Given: 71,850
Joined: Sep 2019
ID: 14
Country:
10-18-2022, 10:42 PM RE: For the Boaties
(10-18-2022, 06:36 AM)Pipkunts Wrote: The Kiwis are right up there in plate boat manufacturers.
In Aus to tow over 2.5mts wide is oversize and to much pissing around. So Trailerable craft.
Surtees NZ, there was a split and a new team started in Aus named Bar Crusher.
Too wide for towing.
![[Image: xFTp3cU.jpg]](https://i.imgur.com/xFTp3cU.jpg) That's like the boat we fished off in Alaska. It belongs to a friend of my brother. It has a cook stove that he has used for heat if he sleeps on it with his dog. Really nice craft.
The following 1 user Likes FlyoverCountry's post:1 user Likes FlyoverCountry's post
• Pipkunts
Posts: 30,346
Likes Received: 169,526 in 29,607 posts
Likes Given: 71,850
Joined: Sep 2019
ID: 14
Country:
10-18-2022, 10:45 PM RE: For the Boaties
The following 1 user Likes FlyoverCountry's post:1 user Likes FlyoverCountry's post
• IDR
Posts: 3,273
Likes Received: 15,092 in 3,115 posts
Likes Given: 11,875
Joined: Dec 2019
ID: 310
Country:
10-18-2022, 11:38 PM RE: For the Boaties
(This post was last modified: 10-18-2022, 11:39 PM by IDR.)
What crazy people do in Idaho and Oregon. Sorry for the infomercial. They have to pay for those boats some how.
Now is the time to get out of the trenches
|